Hi Guest!
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
livinginthepast
Jedi Trainee
Offline
Hey there,
Got the slightly modified radiator ready to install. The mods have increased the thickness of the core by about half an inch (he told me were at 3 rows/11 tubes). Now, it would seem that there should be plenty of room in front of the fan, but I'm curious how much flex I should expect from that fan blade at higher rpms so that I can be sure that blade won't meet core at high revs.
It looks like there's room to drive a truck through there, but I'd rather ask first than find myself with a hole saw chopping through the radiator while on the freeway!
If this works, I will no longer fear trips over Snoqualmie pass into eastern wa. during the summer. If not, I'm out some cash and will walk away with my tail between my legs all the way to the Moss catalog...
Got the slightly modified radiator ready to install. The mods have increased the thickness of the core by about half an inch (he told me were at 3 rows/11 tubes). Now, it would seem that there should be plenty of room in front of the fan, but I'm curious how much flex I should expect from that fan blade at higher rpms so that I can be sure that blade won't meet core at high revs.
It looks like there's room to drive a truck through there, but I'd rather ask first than find myself with a hole saw chopping through the radiator while on the freeway!
If this works, I will no longer fear trips over Snoqualmie pass into eastern wa. during the summer. If not, I'm out some cash and will walk away with my tail between my legs all the way to the Moss catalog...
