Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
my 78 engine was starting no problem but when i started it a couple of days ago it shut off,now nothing,just a clicking noise,changed battery,and did test on junction box next to fuse box,it's getting power but making a clicking noise,could this be the starter or solinoid? /ubbthreads/images/graemlins/canpatriot.GIFthanks for all replies
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
78 mg won't turn over or start
- Thread starter bruiner
- Start date
Share this page
tony barnhill
Great Pumpkin - R.I.P
Offline
If the battery's hot & all you're getting is a click then it points to starter/solenoid problems.
kennypinkerton
Yoda
Offline
Smack the 2 round black relays on the passenger side fender with the back of a screwdriver handle (not too hard, just enough to let them know your there) and/or disconnect them and clean the terminals really good.
Another thing - what junction box next to the fuse box? Do you have a picture of what you are talking about here?
Another thing - what junction box next to the fuse box? Do you have a picture of what you are talking about here?
kennypinkerton
Yoda
Offline
Also, when you changed the battery... did you put in a NEW battery, or another used one? You might still have a dead battery.
Clean the terminals on the balast resistor too if so equipped (it's a long aluminum thing near all the other electrics on the inner fender)
Clean the terminals on the balast resistor too if so equipped (it's a long aluminum thing near all the other electrics on the inner fender)