• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 74 TR6 - Carbon canister rebuild

Share this page

EWD

EWD

Jedi Hopeful
Country flag
Offline
Putting my canister back together and, regrettably, did not take a photo. I have 2 screens, one is mesh and the other is more open. Which one goes on top (toward top of car inside of canister). I assume the other goes between the filter and the retaining ring at the bottom.
Thanks.
Will​
 
Thx for the quick reply and link. Yep, basically the same except for the 2 screens on the TR6. The grid on one is more than twice as open as the other. I’m guessing the smaller grid goes on top ( 50% chance anyway...).
 
Back
Top