-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
'74 Midget - Wiring Question
- Thread starter AngliaGT
- Start date
Share this page
dklawson
Yoda
Offline
Green/white is typically related to the right side turn signal circuit. I thought purple wires were fused, always hot circuits for things like courtesy lights and the horns.
Perhaps the link below will prove helpful.
https://www.mgb-stuff.org.uk/colourcodes.htm
Perhaps the link below will prove helpful.
https://www.mgb-stuff.org.uk/colourcodes.htm
Offline
Doug, I think Doug L. has nailed it - there are a variety of MkIII wiring diagrams, but, looking under the dash, my hunch is that the purple wire either goes to the horn or to the high beam/low beam dip switch. Green White is RH flasher. That said, in one of the diagrams I am looking at (Haynes pg 201) there is a harness connector that has the purple and the green/white going through it ( but not the ignition) so it shouls (?) be plug and play. keep us posted.