Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Lynn Kirkpatrick
Jedi Hopeful
Offline
I think there is a rail or stiffener missing that runs along the lower edge of the hatch opening on my GT. There are supports on each side of the spare that hold up the spare cover board. On each side where the long supports meet the rear body work I can see a short piece that is sort of Z-shaped. It's about 1" wide with a lip up on one edge and a lip down on the other edge. Does anyone have a picture to show what it looks like and how it connects to the lower rear body panel (Moss description) and latch?
I've got some cracking in the bondo repair due to flexing where the lower rear body panel meets the right rear quarter panel. I'll make the repair, but if a stiffener is needed I would like to put it in.
Any pics or description would be greatly appreciated.
Thanks!
Lynn
It's never too early to panic.
I've got some cracking in the bondo repair due to flexing where the lower rear body panel meets the right rear quarter panel. I'll make the repair, but if a stiffener is needed I would like to put it in.
Any pics or description would be greatly appreciated.
Thanks!
Lynn
It's never too early to panic.