Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I believe the temp control valve cable on my MKII Spit is not connected correctly.
Reference Haynes, Page 82, Fig 2.15 "Heater coolant temperature control valve.
From the diagram in Haynes it appears that the cable passes between the firewall and the valve so when the control knob is pushed in [to stop the cabin heat] the valve would rotate clockwise.
My cable is connected on the engine side of the valve so when the knob is pushed in the valve rotates counter-clockwise.
My question is: Which direction does the valve rotate to admit hot water to the heater coil?
Reference Haynes, Page 82, Fig 2.15 "Heater coolant temperature control valve.
From the diagram in Haynes it appears that the cable passes between the firewall and the valve so when the control knob is pushed in [to stop the cabin heat] the valve would rotate clockwise.
My cable is connected on the engine side of the valve so when the knob is pushed in the valve rotates counter-clockwise.
My question is: Which direction does the valve rotate to admit hot water to the heater coil?
