Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
GTP1960
Jedi Knight
Offline
I have gradually become aware ( as have many,many others on the forum,[evident by the # of search hits on this topic], going back thru the years), that if you look at the float bowls funny......they begin to leak at the banjo.
i have a dog like that too.
I believe part of my problem was self induced, by adding heavier, jacketed fuel lines & filter to the forward carby for increased heat protection & aesthetics. It may be torquing the vitron seals on the banjo stud to much.
the fix is using a larger diameter washer above the upper vitron gasket, that puts uniform pressure past the circumference of the rubber seal, and just for insurance , a healthy smear of hylomar blue on the faces of the vitron gaskets and washers.
for now....... No more leaks.
i have a dog like that too.
I believe part of my problem was self induced, by adding heavier, jacketed fuel lines & filter to the forward carby for increased heat protection & aesthetics. It may be torquing the vitron seals on the banjo stud to much.
the fix is using a larger diameter washer above the upper vitron gasket, that puts uniform pressure past the circumference of the rubber seal, and just for insurance , a healthy smear of hylomar blue on the faces of the vitron gaskets and washers.
for now....... No more leaks.
