• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

3/4 inch sway bar bushing interchangability

Share this page

bighly

bighly

Jedi Knight
Offline
Hey MGB gurus. Here's a question for you.
Are the two bushings for a 3/4 inch (uprated) swaybar on a Big Healey the same as that on an MGB? These are the bushes that go on the front frame caps.
 
Moss does not list bushings for a Healey 3/4" bar. Their bushings for a 5/8" MG bar are the same as the ones for a Healey 5/8" bar. Therefore, I assume that the MG bushings for a 3/4" bar will work on the Healey 3/4" bar. Part # 280-915.
D
 
Dave,

Yep. I found out the same. So I am now ready to install the uprated bar.

T
 
Back
Top