Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Got_All_4
Luke Skywalker
Offline
Ok about ready to go nuts here. Had this apart for 3 months now and getting everything back together it was able to start it but no throttle. Stuck at idle. Pretty sure I got everything back together properly but when you push the throttle peddle it won't go anywhere. Had it working last week but had to take it back apart because the cold start injector started leaking really bad. The cable wants to pull the linkage towards the idle position which it's already in. seems like it should be pulling from the other side of the linkage for the throttle to increase.
Tried to find pics in my manual and internet too with no luck. ​Anyone have good pics of the linkage or tell me what I could be doing wrong?
Tried to find pics in my manual and internet too with no luck. ​Anyone have good pics of the linkage or tell me what I could be doing wrong?