• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGB 1980 MGB Trunk Lid

Share this page

Hoosier

Hoosier

Freshman Member
Offline
I am currently restoring a 1980 MGB, and the trunk lid is torqued (for lack of a better word). It appears that this happened becasue over time, someone must have repeatedly leaned on the unsupported side (the right side) of the lid, causing pressure on the side with the support (the left side). We will get it straightened out so it fits better, but I wondered if anyone has seen this before, and knows of anything that can be done to try to prevent it from reoccuring?

Any help or advice would be appreciated.

Hoosier
 
Hoosier said:
I am currently restoring a 1980 MGB, and the trunk lid is torqued (for lack of a better word). It appears that this happened becasue over time, someone must have repeatedly leaned on the unsupported side (the right side) of the lid, causing pressure on the side with the support (the left side). We will get it straightened out so it fits better, but I wondered if anyone has seen this before, and knows of anything that can be done to try to prevent it from reoccuring?

Any help or advice would be appreciated.

Hoosier
Click to expand...

Strut kits.

Contact me off list.
 

Attachments

  • 21926.jpg
    21926.jpg
    32.6 KB · Views: 359
rick is right and he is da man. if you firmly but gently apply opposite pressure to the pressure that bent it, you can usually bend it back if its not too bad.
 
Back
Top