• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 1976 TR6 Seats

Share this page

D

Don_Houston

Senior Member
Offline
How do you remove the back two bolts on the seat rails? The front two were easy by sliding the seat all the way back but the back ones are not accessable when you slide forward. What am I missing?

Thanks!
 
Don,

Have you removed the plates that catch the seat locking mechanism? The rear bolts are under these plates I seem to recall.

Cheers,
M. Pied Lourd
 
Yes I have removed the end plates and the bolts are still about 1.5 inches underneath the top rail. It wont slide any further.

Suggestions?
 
tip the seat forward

Failing that, remove the seat altogether. There is only 2 bolts at the front (one on each side) to remove before you can lift the seat away.

Cheers,
M. Pied Lourd
 
Back
Top