-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
1970 H2 carb question
- Thread starter sim
- Start date
Share this page
dklawson
Yoda
Offline
That appears to be an HS2, not an H2 carb.
Regardless, the jet passes right through the bushing and into the carb body. There is a washer between the jet bushing and carb body that allows radial float for centering the jet but the jet itself has no packing or seal to the carb body or to the jet bushing.
Regardless, the jet passes right through the bushing and into the carb body. There is a washer between the jet bushing and carb body that allows radial float for centering the jet but the jet itself has no packing or seal to the carb body or to the jet bushing.