Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
brgrmyster
Senior Member
Offline
Hi folks,
I'm looking for the original metal (looked like mini hydraulic) emissions lines that were installed on the U.S. model 68 GT6. Mk 1 (pictured below as items 6 and 9). I'm posting here because I believe they were also on the 68 TR250 and possibly the early TR6. Slightly different for the 250, but perhaps I could work with them to match those on the GT6. They ran from a banjo bolt on the inlet manifold to by-pass valves on each CDSE carb, and also to a vacuum control valve. Hopefully some TR250 owner has them in a dusty old box somewhere!
Thanks.
Jeff
I'm looking for the original metal (looked like mini hydraulic) emissions lines that were installed on the U.S. model 68 GT6. Mk 1 (pictured below as items 6 and 9). I'm posting here because I believe they were also on the 68 TR250 and possibly the early TR6. Slightly different for the 250, but perhaps I could work with them to match those on the GT6. They ran from a banjo bolt on the inlet manifold to by-pass valves on each CDSE carb, and also to a vacuum control valve. Hopefully some TR250 owner has them in a dusty old box somewhere!
Thanks.
Jeff
Attachments
Last edited: