Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a 1500 mg midget and have the transmission apart and have a question if you could help me with.
There appears to be be a lot of slop in the 3rd 4th synchromesh which exposes the detent ball, see picture in link below.
https://drive.google.com/open?id=1Ab3d5J6wjea--xCyCcdaCCcKaqYtMkKO
I removed the input shaft and measured about 3/16 of spline exposed from the synchromesh, when you rebuilt yours in the video, did you notices that mush exposed spline? See picture of it in the link below.
https://drive.google.com/open?id=1vmRQW1qcUF_GLxQHKxXibWp8Kak6gHZv
There appears to be be a lot of slop in the 3rd 4th synchromesh which exposes the detent ball, see picture in link below.
https://drive.google.com/open?id=1Ab3d5J6wjea--xCyCcdaCCcKaqYtMkKO
I removed the input shaft and measured about 3/16 of spline exposed from the synchromesh, when you rebuilt yours in the video, did you notices that mush exposed spline? See picture of it in the link below.
https://drive.google.com/open?id=1vmRQW1qcUF_GLxQHKxXibWp8Kak6gHZv