• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

100/ Moss Heat Shield

Share this page

L

Leew

Senior Member
Offline
The heat generated in my 58 100/6 cabin is unbearable. I see Moss sell a 5 piece heat shield kit, however I cannot tell if it can be fitted when the car has all the engine and ancillaries fitted
Has anyone fitted one of these and if so, how difficult is it in a finished running car?
Ta
Lee
 
I removed my old shields . Bought a new set clad the new ones in alloy heat shield because I like the look. I refitted them too all with the car fully built. I used 1/4 drive tooling and lost a lot of skin. ...I also swore a lot and at one stage resorted to drink.....it did all go back in the end. The worst parts were those on the sides of the transmission tunnel.
 
Leew said:
The heat generated in my 58 100/6 cabin is unbearable. I see Moss sell a 5 piece heat shield kit, however I cannot tell if it can be fitted when the car has all the engine and ancillaries fitted
Has anyone fitted one of these and if so, how difficult is it in a finished running car?
Ta
Lee
Click to expand...

I haven't done it, but I think it would be doable. Note Moss also sells 'supplemental' heat shields which should be easily fitted and may work better than the original type:

https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=110224&SortOrder=10
 
Back
Top