-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
100 4 Gear Reduction Starter
- Thread starter TonyR
- Start date
Share this page
Offline
Tony--
Dunno but I got the one for my 100 from this place:
https://www.gustafsonmachine.com/3brit.html
He sold it to me direct probably about 7-8 years ago though I see he now has a bunch of dealers listed on his website.
I bought one for the 3000 a few years later from "British Starters" which is listed on his dealer page.
I also have one on the Courier but I can't remember where I bought it.
The one for the 100 fit fine out of the box. The one for the 3000 required a bit of shimming. They can be a bit difficult to fit because of the way the bolt for the bottom ear mounts--there is just enough room to get it in place. In fact I made a new front plate with threads in the ears for the one on my Courier so I can bolt it up from the rear without having to use a nut.
Dunno but I got the one for my 100 from this place:
https://www.gustafsonmachine.com/3brit.html
He sold it to me direct probably about 7-8 years ago though I see he now has a bunch of dealers listed on his website.
I bought one for the 3000 a few years later from "British Starters" which is listed on his dealer page.
I also have one on the Courier but I can't remember where I bought it.
The one for the 100 fit fine out of the box. The one for the 3000 required a bit of shimming. They can be a bit difficult to fit because of the way the bolt for the bottom ear mounts--there is just enough room to get it in place. In fact I made a new front plate with threads in the ears for the one on my Courier so I can bolt it up from the rear without having to use a nut.