-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
100-4 gas tanks
- Thread starter sheldon
- Start date
Share this page
BertVanBrande
Member
Offline
There's a new looking one on Ebay item# 260738078964 Healey misspelled as "healy". $125 No bids yet, I would call seller for details and negotiate on shipping prior to bidding. No financial interest, etc... I found a nice original one on ebay 1-2 year ago, cheers, Bert
WaltCasten
Jedi Trainee
Offline
I recently purchased one of his tanks in aluminium for my BN2 which is undergoing restoration. I have not tried fitting it to the car yet so I cannot speak of anything regading the fit.
He shipped the tank right away. His crating/shipping charge of $75 seemed high at first however the wooden crate he fabbed up to ship it in protected the tank 100% and turned out to be worth it in the end.
Visually the tank, being of a brushed/lightly sanded aluminium takes your breath away. It's really a thing of beauty. The construction quality is very high. The filler neck, sump, drain, etc are all well done. The only possible nick I have against it is that there is some deformation due to welding heat. Parallel to and along where the baffles run I measured approx 1/4" of deformation along one side and about 3/16" on the other. I think it was the full length welds of the sump that caused it. Fortunately these areas are on the bottom so they will not really be visible. The body guy doing the resto on the car thinks some of it can be floated out but I told him not to mess with it. I don't know what is normal for an original tank or a steel unit.
I would buy another one in a heartbeat given the price and quality plus Jorge is a great guy to deal with and got back to me promptly on all communications.
Sorry for the long post.
He shipped the tank right away. His crating/shipping charge of $75 seemed high at first however the wooden crate he fabbed up to ship it in protected the tank 100% and turned out to be worth it in the end.
Visually the tank, being of a brushed/lightly sanded aluminium takes your breath away. It's really a thing of beauty. The construction quality is very high. The filler neck, sump, drain, etc are all well done. The only possible nick I have against it is that there is some deformation due to welding heat. Parallel to and along where the baffles run I measured approx 1/4" of deformation along one side and about 3/16" on the other. I think it was the full length welds of the sump that caused it. Fortunately these areas are on the bottom so they will not really be visible. The body guy doing the resto on the car thinks some of it can be floated out but I told him not to mess with it. I don't know what is normal for an original tank or a steel unit.
I would buy another one in a heartbeat given the price and quality plus Jorge is a great guy to deal with and got back to me promptly on all communications.
Sorry for the long post.
red57
Jedi Knight
Offline
I'll add that in my experience he is very responsive to his customers.
I bought one of his steel tanks about 6-7 years ago. When it arrived I was very dissapointed in the weld quality and distortion. So I took a couple of pictures and emailed him. He apologized immediately and explained he had just hired a new welder and this was not the quality he usually shipped. The replacement arrived about 3 days later (no charge) and it was a work of art. On top of that he didn't even want the first one back, asked if I could just scrap it locally.
I was impressed - I mean, it was frustrating to get a bad one, but to get the kind of rush, personalized service when a problem was pointed out was great.
I would definaltely buy from him again.
Dave
I bought one of his steel tanks about 6-7 years ago. When it arrived I was very dissapointed in the weld quality and distortion. So I took a couple of pictures and emailed him. He apologized immediately and explained he had just hired a new welder and this was not the quality he usually shipped. The replacement arrived about 3 days later (no charge) and it was a work of art. On top of that he didn't even want the first one back, asked if I could just scrap it locally.
I was impressed - I mean, it was frustrating to get a bad one, but to get the kind of rush, personalized service when a problem was pointed out was great.
I would definaltely buy from him again.
Dave
HEALEYJAG
Jedi Warrior
Offline
It is great to see good customer service from a supplier. I was very leery when I ordered bumbers for my e-type, as I have always found repros to be of low quality. After talking to him I placed the order. To my surprise they were quite nice with very good chrome finish.
Door top chrome for the same car were as the same quality.
I also can recommend him !
Pete
Door top chrome for the same car were as the same quality.
I also can recommend him !
Pete