-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
100-4 dash painting....
- Thread starter Vespa
- Start date
Share this page
Offline
I think that the "mask" is called masking tape.
You won't get a very good job if you don't remove the gages & switches. Even then, it won't likely come out very good unless you remove the dash & lay if flat with enough room to work. The only hard part of removing the gages is to not break the temp gage capillary tube. It has to be disconnected at the radiator & threaded back through all of the holes including the dash.
If you just want a quick color coat, mask off (with tape) everything that you don't want painted silver & paint away.
D
You won't get a very good job if you don't remove the gages & switches. Even then, it won't likely come out very good unless you remove the dash & lay if flat with enough room to work. The only hard part of removing the gages is to not break the temp gage capillary tube. It has to be disconnected at the radiator & threaded back through all of the holes including the dash.
If you just want a quick color coat, mask off (with tape) everything that you don't want painted silver & paint away.
D
Randy Forbes
Yoda
Offline
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Vespa:
What's the scoop on this? How do folks paint in the silver bit around the gauges? Does someone sell a mask to mask off the black while you paint in the silver? Lay it down to me brothers and sisters.....
Paul B.
friends '54 AH100-4<hr></blockquote>
While not original for my car, I decided to go with a painted dash instead of covering it with vinyl.
I took a slightly different (and very time consuming) approach. The entire raised area where the gauges reside has been engine-turned (damacening).
To do your dash as original, you could paint the main portion and then mask off and paint the gauge area. Spraying a clearcoat over the entire finished dash will "melt" away the masking ridge.
I am not aware of any commercially available mask for that purpose (and if it's anything like the MGB wheel mask, it wouldn't work anyway).
[ 01-17-2004: Message edited by: Randy Forbes ]</p>
What's the scoop on this? How do folks paint in the silver bit around the gauges? Does someone sell a mask to mask off the black while you paint in the silver? Lay it down to me brothers and sisters.....
Paul B.
friends '54 AH100-4<hr></blockquote>
While not original for my car, I decided to go with a painted dash instead of covering it with vinyl.
I took a slightly different (and very time consuming) approach. The entire raised area where the gauges reside has been engine-turned (damacening).
To do your dash as original, you could paint the main portion and then mask off and paint the gauge area. Spraying a clearcoat over the entire finished dash will "melt" away the masking ridge.
I am not aware of any commercially available mask for that purpose (and if it's anything like the MGB wheel mask, it wouldn't work anyway).
[ 01-17-2004: Message edited by: Randy Forbes ]</p>