Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
mightymidget
Jedi Knight
Offline
My new job driving a Greyhound Bus is puttin a hurt on my hobby. No extra time.
So I am reworking my 1/4 leaf springs and I am ready to put together. seems some of the parts I need are not available from moss and VB.
1.Center bolt: will probably use regular bolt if unable to source.
2.U bolt at axle end
3. and the sleeves that rest against the springs (u bolts)
What is ever body doing for the hardware when reworking. I don't have enough extra springs to rob the parts I need
So I am reworking my 1/4 leaf springs and I am ready to put together. seems some of the parts I need are not available from moss and VB.
1.Center bolt: will probably use regular bolt if unable to source.
2.U bolt at axle end
3. and the sleeves that rest against the springs (u bolts)
What is ever body doing for the hardware when reworking. I don't have enough extra springs to rob the parts I need
