-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
problem
-
MGB High beam problems
Hi guys, I have been having problems with my left high beam. It has been working on and off for a time. One day it would work without problems. Other days it would just randomly shut off and not come on. Today I decided to fix what I fought to be just a corroded contact surface. After removing...- Carlbanan56
- Thread
- electric forum help help problem tips tips help
- Replies: 4
- Forum: MG
-
MGB Manifold plug
Hi, I have a potential problem with the intake manifold on my MGB -1975. A plug bolt on the manifold won't fasten correctly. The bolt is loose and when trying to fasten the bolt will spin forever. It seems that the threads inside the manifold are torn (check the attached files). I am guessing...- Carlbanan56
- Thread
- forum help help intake intake manifold mgb mgb intake problem tips help
- Replies: 5
- Forum: MG
-
Using the brakes kills the engine! Any ideas why?
Well, this is a new one for me. After spending a little time freshening up Nigel for the fall, I go on the inaugural trip. Every time I touch the brakes, the engine dies. So much for that idea; back home I go. It's puzzling. Starts right up again every time, but every time the brake lights come... -
A
TR2/3/3A Tr3A Oil Priming
Hello all, I have just finished rebuilding my Tr3 engine and am attempting to prime the oil system. I made a spade tip rod and chucked it up into a drill. spinning it counterclockwise ate about 750rpm i get oil to the block galleys and through the pressure tube. but no oil is appearing at the...