• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

oil pan

  1. 2

    Wanted Wanted - TR4A parts engine

    Looking for parts engine for TR4A any condition. Mainly need oil pan, timing gears, all those various bolts, etc. Seized, cracked ok but must be reasonable. Hopefully close to BC home due to shipping. Project engine in the works. Thanks.
  2. V

    Braking Oil Pressure

    '67 BJ8 with recently rebuilt engine and finned cast AL alloy oil pan by PO. This could be a DW or Moss pan; they look similar from photos, 7.75 Qts (= 7.3 litres) of VR1 shows marginally above top dip stick mark. My manual says 7.25 litres capacity including filter Oil cooler fitted. Normal...
  3. T

    TR2/3/3A TR3 Oil Pan Paint?

    Can someone tell me what if any color paint was original to the TR3/3A oil pans? Black, same as the block? Regards, Walter
  4. M

    Broken off dip stick plastic tube, stuck oil pan, and I think too much...

    I went to remove the old plastic dip stick tube from my '74 Midget the other day... and broke it off when it was half way out. The plastic was pretty brittle. So I thought, "OK I'm out to refurb this thing, so let's just remove the oil pan, push the tube through, and redo the pan seals while...
    • MGNoir
    • Thread
    • cursed po oil pan rtv
    • Replies: 10
    • Forum: Spridgets
Back
Top