• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

carburetors

  1. Y

    SOLD!! SU HS6 carbs, setup for TR6

    Originally Volvo carbs but rebuilt for a Triumph TR6, would work on other makes but would likely require a needle/spring change. SU HS6 1 3/4 inch. New throttle shafts, butterfly’s, jets, float bowl floats, valves, gaskets and screws. New needles to support a stock TR6 engine. Parts and needle...
  2. T

    TR4/4A TR4 Carburetors/Idling

    Have adjusted the carburetors SU-H6 as the two front spark plugs were running too rich. Flow meters show identical measurements. Gunsun Colortune shows blue/ red flame. Still the two front cylinders are fouling the spark plugs. If the mixture is set to more lean, it won't idle when driving...
  3. F

    What are these SU carbies from?

    Someone gave me these years ago, thinking I would put them on my Sprite - which I haven't done. Does anyone know what they were originally from? Many thanks Greg
  4. Sopwith_Camel

    MGB-GT dumping gas

    well I'm Dumping gas so I replaced the jets and the grose jets. and i did one of the temp sensors but the carburetors over flow is still dumping gas I mostly have the cold weather screw adjustment in the wrong place after fiddling with it. any ideas should i do the needles? it started on the...
Back
Top