• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

camshaft

  1. MostTriumphant

    Improved rocker oil flow - TR6

    Anybody consider modifying the camshaft to increase oil flow to the rockers? I rebuild the '73 TR6 engine recently, and one of the last steps was to prime the oil galley by using a slotted shaft in the distributor hole to the oil pump, driven by a drill. At first, no oil would get to the...
  2. MostTriumphant

    New member - TR6

    Hi - Dan from Virginia. Glad there is a web site like this. I've used it plenty of times, and finally subscribed! Just finished a rebuild on the '73 TR6. Last year's efforts included fixing all of the frame cracks and replacing the trailing arm boxes, finishing with a nice coating of POR15. I...
  3. Csarneson

    BN4 Engine Rebuild Questions

    Guys you have been incredibly helpful in the past. My car was in many pieces when I got it so I am trying to rebuild based only on images in the manual and what I can find online. Thus I have lots of questions. I've searched the forum on each with unsatisfactory results. 1) What holds the...
Back
Top