Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Online
Today's the day.... For quite some time I've been wanting to bypass my "touchy" rheostat. I've been dreading the job but it's done now.
I removed the ashtray in the center of the dash as well as the speaker panel on the right side. With a little finesse I was able to remove all three wires that attach to the rheostat and connect them together. I made a 3-wire pigtail with male spade connector and plugged each into the female ends of the wiring harness. Original rheostat will be installed so dash retains its originality.
I removed the ashtray in the center of the dash as well as the speaker panel on the right side. With a little finesse I was able to remove all three wires that attach to the rheostat and connect them together. I made a 3-wire pigtail with male spade connector and plugged each into the female ends of the wiring harness. Original rheostat will be installed so dash retains its originality.
