• Hi Guest! Being a Paying Supporter is NOT a requirement to participate at BCF. However, subscribing will help ensure we can continue to serve the LBC community for years to come. If you enjoy BCF and find our forum a useful resource...Please consider supporting us by **Upgrading**
    (PS: Subscribers don't see this banner)
Tips
Tips

Where are the "Metal Dipping Houses" in the SE??

toysrrus

Yoda
Offline
Where are the "Metal Dipping Houses" in the SE??

Howdy Folks,

I may need to have my Bonnet dipped(?).I`m looking for a "Redi-Strip" or someone who does this type of chemical stripping in the NC, SC, GA area.

Anybody know of someone????????????????????????

Thanx, Russ
 

dklawson

Yoda
Offline
Re: Where are the "Metal Dipping Houses" in the SE??

Almost 20 years ago I took the bonnet from our GT6 to Carolina Chemstrip.
https://www.chem-strip.com/
They did a good job for me. At the time I remember seeing that they had the capacity to dip entire cars if you wanted them to.

I used their facility in Glen Raven (now listed as Burlington). However, I noticed on the web site that they also have a facility in SC.
 
OP
toysrrus

toysrrus

Yoda
Offline
Re: Where are the "Metal Dipping Houses" in the SE??

Howdy Doug,

"Thanx" for the info. I`m going to try & contact them today & hopefully they are still open & Chem stripping. Is the NC facility still open in the event the SC facility is not?

Thanx and Happy New Year,

Russ
 

dklawson

Yoda
Offline
Re: Where are the "Metal Dipping Houses" in the SE??

Hi Russ. I no longer work in Burlington to know about that facility. It has literally been 20 years since I took the GT6 bonnet to them. However, the web site is still up and running so I have to assume that at least one (if not both) of the two facilities are operating. A quick phone call and you will know for sure.
 
Similar threads
Thread starter Title Forum Replies Date
C Recommendations on where to send my 1954 BN1 for metal work? Austin Healey 13
jlaird MGB Up date. Where to begin? MG 7
B Windshield glass, where to buy Restoration & Tools 4
steveg TR6 '74 - Where is the Starter Relay located? Triumph 1
C MGA Where to tap into 12v for a power outlet MG 2
S TR2/3/3A I have this miss where the car will start and kinda idle Triumph 23
C Anyone know where to get one of these? Austin Healey 6
P Area where pillar, shroud, and drainage channel meet. Austin Healey 3
P Drainage Channel Where It Meets The Shroud Austin Healey 6
M TR4/4A Where to buy a new crown wheel & pinion for TR4A Triumph 5
PAUL161 T-Series Where My TF Came From MG 1
FlyingCat Spitfire What hoses go where... Triumph 6
A Phase 1, Phase 2, Where's Phase 3 Austin Healey 14
Got_All_4 General TR Someone asked where to get DOT5 silicon brake fluid a while back Triumph 4
Got_All_4 TR6 triumph tr6 wrist pins where to get them Triumph 5
T TR2/3/3A Where is best spot to check temp with infrared thermometer? Triumph 17
Got_All_4 General TR Anyone know where to get one of these? Triumph 5
R J-H Stromberg carb connections? Where do they go? Other British Cars 2
Paulus General TR Where to get HVDA parts and vibration when engaging clutch. Triumph 13
B TR2/3/3A Where on the clutch pedal? Triumph 4
N Spitfire Just picked up this 73 Spitfire. Hasn't run in ten years. Where do I begin? Triumph 10
P T-Series Where's my last TD? MG 2
R engine removal- where to connect hoist? Austin Healey 16
C Where and how to "disconnect" my two SU's? Austin Healey 3
55modified TR2/3/3A warning indicator bulbs need replacing where and what to buy? Triumph 4
S TR4/4A Where do the ground straps connect Triumph 5
Jim_Gruber Hubs a Rocking on side where Speedi Sleeve was installed Spridgets 5
warwick-steve Where did the smell go? Austin Healey 11
Gliderman8 TR6 Convertible cover snaps... where to install? Triumph 2
M TR4/4A Where to buy this aluminium extrusion? Triumph 7
C Gauge faces - where to get Austin Healey 9
G Where can I get bottle jack seals? Restoration & Tools 2
R TR4/4A Where can I get Triumph Midnight Blue carpet? Triumph 0
Got_All_4 TR2/3/3A Where to place the switch for the windshield washer & bottle Triumph 8
C Where to wire a Pusher fan - BN1 Austin Healey 16
Rob Glasgow Brackets, where do they go? Austin Healey 3
Got_All_4 TR2/3/3A Where can i get these door handle parts Triumph 1
M BT7 restoration, Where to start and sill reinforcement Austin Healey 3
M TR2/3/3A Two black wires on control box E where do they g0 after alternator conversion? Triumph 9
M TR2/3/3A Where can I get British Racing Green, 1958 Triumph tr3a touch up paint in the USA? Triumph 3
M TR2/3/3A Where does this screw go? Triumph 6
vette Any Suggestions As to Where to Buy a New BJ7 Gasoline Tank? Austin Healey 24
M TR2/3/3A Where have you guys put your stereos and speakers? Triumph 3
T General Tech Where to? Triumph 2
Jim_Stevens TR2/3/3A Where's the horn ground? Triumph 15
K TR2/3/3A Temperature sensor size where it fits in the housing? Triumph 4
B Tie Rod - Engine: What is it and where does it go? Austin Healey 12
KVH TR4/4A Long Speedo Cable for Overdrive--where does it get tied down? Triumph 7
R Where did it go? A who-done-it mystery! Austin Healey 18
M TR5/TR250 Where were you on this day in 1967? Triumph 19

Similar threads

Top