• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Using an MG properly

bob67bgt

Jedi Knight
Offline
November is turning out to be a busy month. There was a show at Wilmington NC so the BGT got the call to duty. Small trip-around 400 miles total. Then the following weekend we went to the Uwharrie british car gathering in the BGT. That was about a hour each way. The following day(Sunday) we loaded up the BGT and drove straight thru to Ontario Canada. Spent several days with friends and family and this morning at 2:30 AM we put the car back into service and came home. 15 hours later we arrived safe and sound. Our 65 pound dog Harpo took up the rear seat so room was tight. I got to meet up with Dave (14DNA) from the forum. We spent about a hour and a half shooting the breeze.I enjoyed that alot! These cars are not just toys. Take the time to make sure your car is happy and use it! This Saturday is track day at CMP. Hap from Acme Speed shop does a great job getting people to run'em around the track. Maybe the GT needs more action.. Or should I get Lyndas 63 MGB out and run it again this year? I did not check fuel mileage on the trip but I did look at the oil once. Still right at the top. It does not get any better than a nice ride in a MG. Bob
 

PAUL161

Great Pumpkin
Silver
Country flag
Offline
Were going to try and make it this year. Have to bring the wifes "B", the TF is still in a gazillion pieces. PJ
 

14dna

Luke Skywalker
Country flag
Offline
Bob;
I also thoroughly enjoyed our visit. Harpo is great, my dogs would have loved to run the yard with him.
Boys, this man's MGB runs smoother than new!
I gotta get me one with dual carbs again.
The 15 hour run home could get tiresome, I'll bet, but you and Linda are always welcome here. Just lets not wait so long to see each other next time.

Dave :savewave:

P.S. As Bob says, "drive 'em like you stole 'em" :driving:
 
Country flag
Offline
Want to take that fun and enjoyment to the next level? Take a look at this - a hotel room in a box! No idea on what the cost is though....

https://www.evo-pod.com/

Here's a video:

itR6r3Q" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>

NFI btw....just thought this was really cool!
 

JPSmit

Moderator
Staff member
Silver
Country flag
Online
Silverghost said:
- a hotel room in a box!

Very cool! though FWIW up north here we just call them Tent trailers, though I suppose "hotel room in a box" might catch on.
:whistle:
 

rlwhitetr3b

Jedi Knight
Bronze
Country flag
Offline
Cool!
Might be a little too small. Where do you carry your camping stuff? The "tent trailers" I've been around had some space to pack things even when they were folded down for travel.
 
Similar threads
Thread starter Title Forum Replies Date
K TR2/3/3A Centering the brake rotors(disk)s in the front brake calipers using the shims? Triumph 5
T Looking for recommendations re using a Seacan for vehicle storage Spridgets 7
J TR4/4A Getting electrical shock from horn button when using the horn. Triumph 9
TomMull Using my press to remove stuck Girling caliper pistons Restoration & Tools 13
Oldi.Tec Spare Part Re-Manufacturing using 3D-Printing Restoration & Tools 5
K TR2/3/3A Using a dial gauge to adjust valves when rocker arm surfaces are worn? Triumph 9
L TR2/3/3A Who's using what to treat rusty stuff TR3 Triumph 21
Patrick67BJ8 Special Tuning using AF Equipment by Innovative Motorsports Austin Healey 27
H Is there any difference in using the 1275 Float Bowl that have a different casting? Spridgets 6
CJD General Tech Boeing using Lucas parts? Triumph 7
TRMark General Tech Anybody Using Star Tron Triumph 2
Martinld123 Problem Using LED lights with Existing Brake Lamps Austin Healey 20
G TR4/4A Using existing fuel line Triumph 5
D Wanted How to locate my father's past Austin Healey1963 3000 Mark III using its Vin # Austin Healey Classifieds 5
B TR6 Timing using a vacuum gauge Triumph 13
Gerald_Gordon TR4/4A Attaching badges without using a badge bar Triumph 5
M TR2/3/3A What Lead Substitute + Octane Boosters is everyone using in there gas tanks? Triumph 14
Basil Admin Note Using FREE BCF Classifieds Triumph Classifieds 0
Basil Admin Note Using FREE BCF Classifieds Spridgets Classified 0
Basil Admin Note Using FREE BCF Classifieds MG Classifieds 0
Basil Admin Note Using FREE BCF Classifieds Jaguar Classifieds 0
Basil Admin Note Using FREE BCF Classifieds Other British Classifieds 0
Basil Admin Note Using FREE BCF Classifieds Austin Healey Classifieds 0
Basil Admn Note Using Prefixes to filter threads of interest Triumph 5
KVH TR4/4A Using Drill to Spin Oil Pump Shaft Triumph 10
J Bypassing battery cutoff switch, using is as anti-theft only? Austin Healey 20
KVH TR4/4A Using the Engine Stand Triumph 3
K TR2/3/3A Clutch bleed using"gravity bleed" method? Triumph 4
KVH General TR Using an Old Fuel Pump Triumph 3
aseriesspares Spitfire What Gearbox are you using. Spitfire / Midget 1500 Triumph 2
aseriesspares What Gearbox are you using. Midget 1500 Spridgets 5
J BJ8 carb sync using a Uni-Syn, can you actually use it? Austin Healey 42
Rut 5 speed conversion using the Datsun clutch assembly Spridgets 10
bthompson Using the brakes kills the engine! Any ideas why? Spridgets 17
K TR2/3/3A Using Moss front end alignment gauge? Triumph 6
M Healey Overdrive Accumulator Piston using O-Ring Seal Up-date Feedback Austin Healey 4
J Does a texas cooler make a real difference ? I now am using an a moss flex fan ! Austin Healey 24
drambuie Anyone using flame thrower Electronic distributor Austin Healey 6
Q TR2/3/3A Using DOT 5 Brake Fluid On TR3A Triumph 34
F Using 12 point ARP style rod and main bolts Spridgets 9
Nelson Using timing light Spridgets 17
M Anyone using a MaxJax on a BN2 ? Austin Healey 9
58Custom A14/A15 engine users: What yall using for headers? Spridgets 11
S TR2/3/3A Using a timing light for setting TR3 Timing Triumph 4
justin_mercier TR6 "new" steering rack for TR6 ? Anyone using one ? Triumph 5
T Using Midget Suspension parts on Nash Metropolitan MG 10
A Wedge Using TR7 Main Bearing Studs on a TR6: how to note Triumph 7
K Paging Martx-5...What valve gap are you using? Triumph 0
T using UNI-SYN tool Triumph 46
T Anyone using an LED light like this Triumph 39

Similar threads

Top