Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Nelson
Jedi Warrior
Offline
36 years ago I removed the wiring harness from my Sprite to do a few body repairs. This year I plan to finish my "summer" project. I don't recall the placement/routing of the harness from the rear of the car to the front. I believe it passes from the rear into the space above the wheel well and next to the outside panel. From there it goes down toward the floor but does it then exit the inner space and rest against the corner behind the door and just lay on the floor as it runs forward? Would it just lay on the floor against the side under the door? This would place it so the trim panel below the door would not be completely against the side of the car. I have a batch of Sprite books but don't remember seeing any info in any of them about this.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.