• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Repainting "old" license plates

Share this page

Cottontop

Cottontop

Jedi Warrior
Offline
Re: Repainting "old" license plates

That looks really nice, but I doubt whether I'd have the patience to sand through the top coat to reveal the number's color. Seems like maksing them off would be a lot easier and just as good unless you're looking at them from inches away....

That said, I've got a pair of vintage, never used Texas '68 plates with the "Hemisfare" logo that I plan to put on my '67 Healey at whatever indeterminate time I finish it....
 
Re: Repainting "old" license plates

Tim great idea of sanding the letters I would have never thought of that!Thanx for the post.
One point I thought I would mention after you have cleared the white and it is fully dry, scuff over the finish with a scotch brite pad to give it a mechanical adhesion . Also needed if the black color is allowed to dry past the dry window ie 12 hrs or 1 day scuff before re clearing. Missing these steps could result in peeling or poor adhesion between coats.

Cheers
 
Back
Top