• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

removing rear fender

66healey

Member
Offline
I am trying to remove my rear fender to fix some rust, and cant get to the bolts on two bolts over the wheel arch. They look like they are behind the top mechanism. Am I going to have to pull the convertible top off to remove the fender? The cat is a 66 bj8. Any help would be greatly appreciated.
 

GregW

Yoda
Platinum
Country flag
Online
Did yo get this bolt? You actually access it from the wheel well, not the interior.
 
OP
66healey

66healey

Member
Offline
Yes I have got that one, its the ones in front and to the rear of that one that are giving me fits. At the very front/top from inside the wheel well I can see the thread end but cant find the head. The one towards the rear has a nut inside the wheel well, I can turn it, but it seems like it is free spinning and I cant find the other side of it.
 

GregW

Yoda
Platinum
Country flag
Online
Yeah that one to the rear is a rear bugger. It is nestled behind the drain channel. I haven't done this with the top installed so... If you are a contortionist, you may get a 7/16" wrench in from the back side where the arch slopes back down. Slide it in behind the drain channel and turn the nut from the outside until you can seat the wrench. Then loosen the nut. Kinda sounds like a two person job. I can't remember off hand where the front one is other than what you see in my previous photo where the hole is (to the right of the marked one).
 
Similar threads
Thread starter Title Forum Replies Date
TR4 TR4/4A Removing a rear fender on a TR4 Triumph 7
BN6_2197 Removing connecting link between shock absorber and rear axle Austin Healey 4
Gliderman8 TR6 Removing Left Rear brake line... help! Triumph 9
maxwedge5281 Removing Complete Rear End From BN6 Austin Healey 5
pkmh Removing Passenger Rear Bearing Nut Austin Healey 26
Jim_Gruber Removing the Rear Axle Seal Spridgets 4
KVH TR4/4A Removing Rear Differential Seal--Solid Axle Triumph 1
busybrit Removing the drain tube fron the rear mains cap. Austin Healey 4
R Removing rear quarter elliptical Spridgets 5
pkmh Removing Rear Hub on BJ8 Austin Healey 48
M Having a hard time removing the rear bumper [pic] Triumph 4
TR3MT Removing rear fenders Triumph 10
drooartz Removing the $@#! rear hub oil seals Spridgets 3
Ohiobugeye Whats the key to removing the rear radius arm bush Spridgets 6
Guinn removing rear rubber bumper MG 6
T Help removing the rear drive flange Triumph 2
HAN8L1965 Removing backing plate on rear drum brakes Spridgets 3
sultanoswing T-Series Removing Rear Hatch - tight screws!! MG 1
bluemiata90 Removing rear springs Triumph 3
L Removing Master Cylinder Without Paint Damage Austin Healey 27
D Removing the steering wheel hub Spridgets 12
J General MG Thoughts on removing a stubborn 2-ear spinner MG 5
K TR2/3/3A Removing scratches and scrapes fro the wind wings that screw to the windshield? Triumph 9
Gatheringtree TR2/3/3A Removing the headlamp bezel rim Triumph 2
R TR6 Removing the charcoal cannister considerations Triumph 7
S TR2/3/3A Removing a stuck oil drain plug Triumph 13
K TR2/3/3A Removing TR3 windshield stanchions Triumph 4
KVH General Tech Removing Piston Wrist Pin Triumph 2
C Removing AH Sprite Mk 1 windscreen washer pump Restoration & Tools 2
M Need help removing the pinion assembly from a late 1275 steering rack Spridgets 7
jfarris TR2/3/3A Removing choke cable from dash insert Triumph 3
doakley Spitfire Removing facia Triumph 2
7 Wedge Removing sunroof frame Triumph 5
D Removing the last rust from pitted steel Restoration & Tools 11
D Removing Old Radio Austin Healey 4
S Removing Overdrive Shaft Lever Pin Austin Healey 7
L TR2/3/3A Any trick to removing TR3 doors? Triumph 12
M TR2/3/3A Removing Wires From Stator Tube Triumph 7
T TR2/3/3A Requesting help on removing TR3A steering column and box Triumph 21
longbridgehealey Removing BN4 Bonnet Austin Healey 9
C Removing the Healey "Flash"? Austin Healey 11
Jim_Gruber Removing a Spridget Engine Checklist Spridgets 5
S TR2/3/3A removing the temp gauge needle Triumph 5
Sarastro General Tech Any good ideas for removing liners? Triumph 20
R TR2/3/3A Removing WD-40 Triumph 6
F Removing oil and water guage from BT7 dash Austin Healey 17
R TR2/3/3A Removing transmission Triumph 3
Joe Schlosser Removing Control Knobs Spridgets 9
W TR2/3/3A Tell me there is a trick to removing lower control arm pin... Triumph 45
Bona42na Spitfire Removing Transmission/Gearbox from underneath Triumph 3

Similar threads

Top