Offline
Hey all,
Got my overdrive completely checked out electric wise and
everything working right. Could hear the solenoid clicking
with the gearshift lever check. But was not engaging on the
road. Pulled the trans tunnel cover - just hate taking it all
apart after working so hard to get it together. Anyway,
got it off, and the solenoid is definitely pushing the lever
up and down about 1/2 inch. Have not test drove it yet but would not expect it to start working all of sudden - wait,
probably will after sweating buckets getting it apart.
Question for you Overdrive experts, any good suggestions on
easiest way to adjust, check, etc ? Got the manual and Norman
Nock's tips binder but thought I would see what y'all say.
Thanks,
Mike
Got my overdrive completely checked out electric wise and
everything working right. Could hear the solenoid clicking
with the gearshift lever check. But was not engaging on the
road. Pulled the trans tunnel cover - just hate taking it all
apart after working so hard to get it together. Anyway,
got it off, and the solenoid is definitely pushing the lever
up and down about 1/2 inch. Have not test drove it yet but would not expect it to start working all of sudden - wait,
probably will after sweating buckets getting it apart.
Question for you Overdrive experts, any good suggestions on
easiest way to adjust, check, etc ? Got the manual and Norman
Nock's tips binder but thought I would see what y'all say.
Thanks,
Mike