• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Needed - early Spridget fenders

RickB

Yoda
Offline
I have two sets of early fenders I've been saving.
I just went out and uncovered them to see what I've got.
One set is pretty rusty, it's a matching set but the area between the headlight and hood where it makes that gentle curve has been hit hard, dented and creased.
That's the drivers side of course, it's also too rusty to feel good about.
The white pair isn't matching, the passenger side has the turn indicator closer to the bumper and the drivers side has the turn indicator closer to the headlight.
To top it off the driver side has a rusted out area down below the bumper - the edge and a large area of metal are gone.
To sum up, I have two usable passenger side fenders, a little rusty but no cancer.
I have zero good driver side fenders.
If someone knows about a pair of good early fenders or one good drivers side with the indicator closer to the bumper please let me know.
Not interested in new high priced replacements, just looking for a decent set of used fenders I can prep for paint.
I have stuff I can trade from a MK1 Midget if desired.

Rick (9 1/2 weeks till takeoff) Bastedo
 

Whitephrog

Luke Skywalker
Country flag
Offline
I have two decent spare front fenders from a 66 Sprite. I'll be happy to send photos.
 
OP
RickB

RickB

Yoda
Offline
Thanks Jean, that would be awesome!!
 

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
I know I'm stating the obvious but don't forget that different years have different height signal light holes - I'd hate to see you get it put back together and realize the front end is off kilter.
 
OP
RickB

RickB

Yoda
Offline
Yes, thanks JP.
 
Similar threads
Thread starter Title Forum Replies Date
Wirewheels MGB NEEDED: Partial B post for early MK I MGB MG 0
B Early 100 brake parts needed Austin Healey 1
T TR2/3/3A Early TR3/4 trans help needed Triumph 7
RickB Early Midget boot picture needed Spridgets 3
L Early B transmission tunnel cover needed MG 8
Patrick67BJ8 Healey Mechanic Needed - El Paso, Texas Area Austin Healey 0
H TR2/3/3A Rock guard needed Triumph 2
C MGB More Weber help needed MG 27
V 96 Chimera help needed TVR 1
A TR2/3/3A VERY wobbly TR3 - help needed!!!! Triumph 53
vpanza Wanted TR3 FRONT backplates needed Triumph Classifieds 2
Darwin Wanted Spitfire engine needed Triumph Classifieds 0
Joel Lester TR2/3/3A What final front suspension torque settings needed? Triumph 7
JohnGone Wanted Q: Small Boot, Small Spare Tire? And, Jack needed. MG Classifieds 2
M General MG Wire Wheel Specialist Needed in Los Angeles area MG 0
H Wanted MK2 - Please, help needed Jaguar Classifieds 60
P MGB Zenith water choke gasket needed MG 4
AUSMHLY BJ8 transmission mainshaft bearing force needed to install/remove Austin Healey 1
T Wanted BJ7 parts needed Austin Healey Classifieds 0
Jim_Gruber Bugeye Seat Pans needed Spridgets 1
AUSMHLY BJ8 Second Gear Needed Austin Healey 16
E GT6 Help electrical guru needed Triumph 4
Joel Lester TR2/3/3A What size speedi-sleeve needed for pinion seal on a TR3? Triumph 6
tr6web TR6 More leg room needed Triumph 5
S Series 1/2 Wiper Motor Needed Rover / Land Rover 0
R Rust in Block? Help needed! Austin Healey 6
steveg TR6 Hood release pictures needed Triumph 22
steveg Picture needed - front turn light Austin Healey 4
steveg TR6 Spec needed for correct ride height Triumph 28
Michael Oritt 100 throttle linkage--help needed Austin Healey 3
Mickey Richaud TR4/4A TR4 Head Needed Triumph 4
D New Battery Needed for BJ8 Austin Healey 9
Michael Oritt Tenax fastener source needed Austin Healey 6
Jim_Gruber PS Steering Rack Lower Bracket Needed - Some DA over torqued and snapped it in half Spridgets 9
N Electrical Troubleshooting Advice Needed Spridgets 6
Jim_Stevens TR2/3/3A Quick measurement needed Triumph 4
Jim_Gruber Help and Advice needed for post pressure washing debacle Spridgets 10
D Wanted Needed for 1954MGT. MG Classifieds 1
Michael Oritt Speedi-sleeve p/n needed Austin Healey 7
2 Wanted SU-h6 Carb. BODY ONLY needed, badly worn. for TR3A Triumph Classifieds 5
J BJ8 Turn signal help needed. Austin Healey 6
F Water pump replacement on my BT7 advice needed please Austin Healey 18
Michael Oritt Center rod, bracket and mirror info needed Spridgets 8
BoyRacer Ideas needed for under dash radio mount, cup holders, glove box Austin Healey 39
T Radiator Shroud "Chinese Red" Match Needed Austin Healey 10
Got_All_4 General TR Is there a special tool needed for rear brake cylinders Triumph 14
R Our J-H plan - torque specs needed! Other British Cars 2
Jim_Stevens TR2/3/3A Door capping—batting needed? Triumph 9
M Modern Paint Code Needed for Honolulu Blue Restoration & Tools 1
T TR2/3/3A Why is voltage stabilizer not needed for TR3 fuel gauge? Triumph 4

Similar threads

Top