• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Lords Fusor

Share this page

61Alpine

61Alpine

Senior Member
Offline
Not so much a tool as a process.
Has anyone used Lords Fusor (bonding epoxy) for small patch panels or floor pan installation. I have read that this can be a good alternative to welding.
The claims are that it is every bit as strong.
Rob
 
This has been discussed in the past on the MG forum. For patch panels this should be fine, but for floorpans, where they are structural, do not use it. This was intended for use on modern vehicles which were designed to use adhesives in the construction process. For any older vehicles which were designed prior to the advent of these adhesives, never use them on any panels that contribute to the strength of the bodyshell.
 
Back
Top