• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Help - I need exhaust mount photos

David_K

Jedi Hopeful
Offline
I've got a 1965 BJ8. Would someone please post some photos of each of the exhaust to body mounts. I've got all new exhaust mounting kits, but I'm having trouble finding where they all go. The Moss cataloge shows the metal/rubber mounts in a position where they would bolt to the floor pan of the car. I assume that might not be correct.

Close up Photos should solve my delima real quick. Thanks Guys!! /ubbthreads/images/graemlins/hammer.gif
 

AUSMHLY

Obi Wan
Country flag
Offline
Hi David,
If all goes well, I should get my 64 BJ8 out of the body shop Tuesday evening. If no one posts any photos by then, I will jack up my car and take some pictures for you Tuesday night. Cheers,Roger
 

GregW

Yoda
Platinum
Country flag
Offline
Hi David,
This is the only photo I have. Towards the back of the car.
250747-mufflermount2.jpg
 

Keoke

Great Pumpkin
Country flag
Offline
Hi David I do not have any Photos. However, the moss locations are correct. From Gregs piccy you can see there will be mounting holes near the rear Out rigger that supports the rubber hangers.---Keoke
 
OP
David_K

David_K

Jedi Hopeful
Offline
Keoke, Greg, and Roger,

Thanks for responding. I called up a fellow healey enthusiast and had a look at his car. I knew about the rear mounts in Greg's photos, but my new floor pans threw off my idea of where the front mufflers mounted. I've got everything sorted and will be drilling the floor pans this week.

Thanks again!
 
Similar threads
Thread starter Title Forum Replies Date
apbos Need exhaust help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Spridgets 18
T Need help with exhaust part. Triumph 14
angelfj1 TR5/TR250 TR250 Need Help identifying wires (2 - black) feeding starting solenoid Triumph 6
Basil Admn Note Our neighbors need emergency help Triumph 0
Basil Our neighbors need emergency help Spridgets 0
Basil Admin Note Our neighbors need emergency help MG 0
K TR6 Need help with Mimosa Yellow Paint Triumph 1
J TR2/3/3A Need help with a value for this TR3 please Triumph 6
M Need help removing the pinion assembly from a late 1275 steering rack Spridgets 7
TheRealDestrux MGB 1977 MG MGB need help putting top down MG 1
J TR2/3/3A Need help with pivot and body bracket for hood Triumph 2
J MGB Need help identifying these parts MG 6
B MGB-GT Need help with MGB GT rattle MG 0
K TR2/3/3A Help! No start! Need input from you guys. Triumph 9
T Wedge TR7 engine, need help identifying part. Triumph 5
A Spitfire Need help with 1980 Spitfire 1500 Triumph 5
Bayless Login problem need help FORUM Navigation Questions 7
N Electrical Issues Need Help Austin Healey 8
vette Renewing Subscription, need help. FORUM Navigation Questions 1
F Help need reinstating my heater - BT7 Austin Healey 7
55modified Need photoshop help for side vent options on my BN1 Austin Healey 6
N TR6 Need a little wiring help with a 74 Tr6 Triumph 6
5 Need help to id Midget year Spridgets 2
J TR2/3/3A Need Help with 62 TR3A Triumph 6
C TR6 Need help with a 1969 triumph tr6 Triumph 21
55modified need help with custom air deflector for BN1 Austin Healey 12
S TR4/4A Help. I need the glove box latch part Triumph 3
K TR4/4A Need help with clutch issue... Triumph 2
L TR6 need help on long dead TR6 Triumph 16
Jim_Gruber Need help to figure out an easy solution for this one. Spridgets 13
GBRandy MGB 1971 MGB return to the road - need some help. MG 10
G Need Help: Oil leak/crankcase pressure Spridgets 18
B TR4/4A Need Help Finding Triumph 3
S Wedge Need help with TR8 no spark Triumph 7
P TR2/3/3A Need Help Identifying These Seats Triumph 6
M MGB MGB Special Tuning 4 Cyl Carbs - Need Help w ID and Replacement Needles MG 1
M TR2/3/3A Need Help With Carb ID On My TR3B Triumph 8
Zimmycobra TR4/4A Need timing help - please! Triumph 15
D 68 Sprite value - need help Austin Healey 9
A Need help wiring my tach Spridgets 11
MKIII_Joey BJ8..need help.. Austin Healey 17
G Need some help identifying some E-Type parts please -- Jaguar 4
J MGB Need help identifying pistons for 18V motor! MG 0
B TR2/3/3A Need help with tr3 project Triumph 9
V General TR Need help with installing glass and new seal into my surrey top. Triumph 2
2wrench TR6 Need help finding gear shift lever spring retainer, please -- HVDA install Latest. Triumph 9
Steve P. Need help with oil filters Spridgets 1
RickPA Need help installing steering idler oil seal Austin Healey 6
M TR4/4A Need help with TR4A brakes Triumph 10
Willie_P TR4/4A Alloy Valve cover: STUD SPECIFICATION - need help!!! Triumph 5

Similar threads

Top