BN1 restoration pictures

[LuckyLuke]

My BN1 is getting closer to completion, but I need help on the following issues:

1.Pictures that show the exact routing for the wiring harness for under the car and trunk.
2.Pictures that show the routing of Speedo and Taco cable through the fire wall
3.Picture of support bracket for exhaust down pipe

Any idea where I can find tehse pcitures?

Rolf

 

[Keoke]

Someone on the forum may come forward with those pictures. However, You might also check with "British Car Specialties" in Stockton they may have the data you need.--Keoke

 

[LuckyLuke]

I just check the website, interesting company ... Bn2 pciture sets only. With all the great responses I recived on the other topics I'm sure someone has BN1 pics

Thanks Rolf

 

[zblu]

LuckyLuke
Got an early BN1 here, wont be near car until next week, only the areas you mentioned?
got mine redone with the original cloth yellow/black bumblebee covering

 

[LuckyLuke]

Thanks for your reply,

I bough all the Austin books I can get and could not find the right views , your help is really appreciated. The car was a basket case when I got it and therefore I have no clue how the cables were routed.

Most important is the routing of the main wiring harness under the car. The engine compartment wiring is done J

So here the list:

1. Main wire from the underbody rail to the fuel pump and car trunk
2. Wire in the trunk
3. Wiring from main harness to front lights
4. View of Tachometer and Speedometer cable through the firewall (from engine perspective and interior perspective.

Thanks Rolf jansrolf@yahoo.com

 

[LuckyLuke]

Thanks for your reply,

I bough all the Austin books I can get and could not find the right views , your help is really appreciated. The car was a basket case when I got it and therefore I have no clue how the cables were routed.

Most important is the routing of the main wiring harness under the car. The engine compartment wiring is done J

So here the list:

1. Main wire from the underbody rail to the fuel pump and car trunk
2. Wire in the trunk
3. Wiring from main harness to front lights
4. View of Tachometer and Speedometer cable through the firewall (from engine perspective and interior perspective.

 

[rustynuts]

I can help you out since my BN1 is presently sitting on my hoist. Only problem is that I just removed the entire harness but I can take pics and explain to you as to were it was if you want. I will take some closeups and try and send them directly to you.
Dennis

 

[rustynuts]

check your email, I sent you pics

 

[Dave Russell]

I just check the website, interesting company ... Bn2 pciture sets only. With all the great responses I recived on the other topics I'm sure someone has BN1 pics
Thanks Rolf

Hi Rolf,
In addition to the 53 pic set for the BN2, BCS definitely DOES have a full set of 110 pics of a BN1 restoration. There are many detailed pics of the BN1 wiring in this set. I have both sets.
https://www.britishcarspecialists.com/
1-209-948-8767
D