The car is an early phase II. I agree with Patrick67bj8 that the rear panels do look better with out the square pattern even though it is suppose to have them. Anyhow unless you buy the panels you cannot not get the embossed square material. Then you would have to try and match the material. So to have everything match with all the material we bought we had no choice but to go with the plain surface.
As far as the rear panel wood, we just used the old, falling apart, wood as the pattern. If you look at the photo I do have the two studs for the shoulder harness and have purchased the correct bracket (from British Car Specialist) and will install new seat belts. I hope the fold down shelf clears the belt bracket. Can anyone confirm this?
Jjs64bj8
As far as the rear panel wood, we just used the old, falling apart, wood as the pattern. If you look at the photo I do have the two studs for the shoulder harness and have purchased the correct bracket (from British Car Specialist) and will install new seat belts. I hope the fold down shelf clears the belt bracket. Can anyone confirm this?
Jjs64bj8