• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Clutch causes engine to stall?

BobsBugeye

Freshman Member
Offline
Hello, I have a 1961 Bugeye, 948cc. I've been working on the carburetors and have them adjusted somewhat. My problem is I set the idle rpm at 1000 and when I push in the clutch the engine idle drops usually to around 700-800 rpm. Sometimes if I hold the clutch down for a longer time than just shifting the engine will slow way down and run rough and almost stall. I've never seen this before on any car with a clutch. Any thoughts?
 

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
Sounds like something is dragging that is not evident when the car is in neutral, which makes me think pressure plate or thrust bearing.
 

dklawson

Yoda
Offline
Worst case - very worn thrust bearings for the crank. For peace of mind I would take the time to measure the crank endfloat and compare it to the manual to see if it is in acceptable limits.
 

David_Doan

Jedi Warrior
Country flag
Offline
Could be the issues above OR you're actually idling on one carb or the carbs aren't balanced. When you press the clutch it is loading the engine enough to slow it down.

A quick check to check for carb balance is to take the air cleaners off and restrict the intake of each carb one at a time with your hand. If they are balanced, the engine will slow down the same amount for each. If one has a much smaller effect than the other you know that carb is not contributing as much as the other.

Note: A small decrease in idle speed with the clutch pedal down is normal.
 
OP
B

BobsBugeye

Freshman Member
Offline
I haven't had time to test any suggestion yet. But I am having trouble getting the carburetors to work properly so I will try the carb test today and see what happens.
 
Similar threads
Thread starter Title Forum Replies Date
71TR6 TR2/3/3A Aftermarket brake and clutch master cylinders - black extension? Triumph 6
tr6nitjulius For Sale TR6 Clutch Master Cylinder $40 Triumph Classifieds 0
Turbozinke TR2/3/3A Varying clutch engagement Triumph 6
K TR2/3/3A Pushing down the clutch pedal when starting the car? Triumph 13
DutchConnection Clutch finger problems on Powetune aftermarket clutch cover Spridgets 0
3 100 Clutch Freeplay Austin Healey 7
K New Clutch Master/Slave Cylinder Austin Healey 1
wkilleffer MGB MGB clutch slave bleed driving me nuts MG 38
Govtslug TR6 Clutch Problem Triumph 21
wkilleffer MGB 1974 MGB clutch master cylinder questions MG 1
AUSMHLY Clutch Pedal Freeplay Austin Healey 18
T General Tech Clutch trouble Triumph 12
K TR2/3/3A Gearbox clutch adjustment. Triumph 1
AUSMHLY Clutch Stalls Engine Austin Healey 16
D Wanted WTB - clutch fork and shifter from Datsun 5 speed #60 Spridgets Classified 0
G MGB Sorry from the Newbie...Clutch gone on 78 MGB MG 17
P TR2/3/3A TR3 Clutch Bleeding Problem Triumph 10
T Spitfire Clutch fork and hydraulic cylinders Triumph 3
Got_All_4 TR6 Which Clutch Master Cylinder Fork is for TR6 Triumph 4
AUSMHLY BJ8 Clutch Pressure Plate, Old vs New Austin Healey 4
Lin Brake/Clutch Fluid Austin Healey 11
R TR2/3/3A Clutch Petal Adjustment Triumph 2
AUSMHLY BJ8 Clutch Fork Bush Replacement Austin Healey 5
KVH General Tech New Clutch Installation--TR4A Triumph 5
T Spitfire Spitfire MK2 Clutch Hydraulics Triumph 2
D Clutch Fork Pin Removal Austin Healey 4
AUSMHLY BJ8 Clutch Pressure Plate Brand Preferences Austin Healey 3
Michael Oritt Clutch Linkage Austin Healey 19
M 1275 Race Clutch Racing 5
G MGB 1978 MGB clutch is out..! MG 39
M TR2/3/3A HVDA Replacement Clutch Disc Available from Moss Triumph 10
B Spridget with a Tilton Race Clutch Racing 1
AUSMHLY Clutch Pilot Bush: NOS vs Aftermarket Austin Healey 8
T Clutch Pedal Engagement Point Austin Healey 1
TR6Canuck For Sale 72 TR6 clutch and transmission Triumph Classifieds 4
K TR2/3/3A Clutch slave "return spring"? Triumph 3
vintagemechanic Recommended clutch kits Jaguar 3
K TR2/3/3A Mystery Clutch MC? Spitfire....TR4....69-70 TR6??? Triumph 2
K TR2/3/3A Clutch Master Cylinders? Triumph 1
R TR2/3/3A Clutch Engagement Triumph 31
S TR2/3/3A Clutch pushes hard when engine is hot Triumph 4
T TR2/3/3A TR3A clutch problem Triumph 15
S MGB 1978, replacing the clutch. MG 3
S MGB clutch replacement MG 7
K TR2/3/3A Clutch "Long Throw" Slave Cylinder? Triumph 4
D BJ7 Clutch Austin Healey 6
K TR2/3/3A An Unusual Brake and Clutch MC Set Up? Triumph 2
K TR2/3/3A Clutch and Brake Master Cylinder push rod stop bolts? Triumph 15
K TR2/3/3A Clutch Slave Cylinder location when TR3 has a TR6 Gearbox? Triumph 16
E TR2/3/3A Tr3 a clutch hydraulics problem, again. Triumph 16

Similar threads

Top