Rick_Neves
Freshman Member
Offline
I managed to damage my BN-2 on the last event, last race, last lap of the season. It hit the wall broadside, not to fast. most on the front quarter. Interesting enough the spinners took most of the hit. The force was transmitted through the wheel and lower control arm to the weldment. the weldment was ripped up and inward. The top of the frame was ripped up where the weldment attaches and the frame was kinked in on all fours sides.
Sorry for the bad photo, this is from the top. For and aft of the damage, the frame looks like its in its original position. It might be just an optical illusion that it looks considerably bent in. Just wondering how the listers would go about fixing this kind of damage specifically dealing with making this stronger than original.
Thanks for any suggestions.
Sorry for the bad photo, this is from the top. For and aft of the damage, the frame looks like its in its original position. It might be just an optical illusion that it looks considerably bent in. Just wondering how the listers would go about fixing this kind of damage specifically dealing with making this stronger than original.
Thanks for any suggestions.