TR4
Jedi Knight
Offline
I recently rebuilt my TR4 Stromberg carbs and now I'm in the process of tuning them in. I have the adjustment screws all the way out and the lift test and spark plugs still show a very lean mixture. Is there a trick to getting more gas to flow or are there different needles or jets to try? I even installed a new fuel pump and fed it from a clean can to see it my problem was the pump or a clogged fuel line but I got the same results. Of coarse the carbs worked fine prior to the rebuild but all the o-rings were shot so I decided on the complete rebuild. /ubbthreads/images/graemlins/thirsty.gif