D
DougF
Guest
Guest
Offline
I bought an "S2" cam about 15-20 years ago from British Parts Direct. Found them out of Hemmings. They must have shut their doors shortly after my purchase as I don't recall ever seeing anything about them since. They listed two cams at the time. Their S2 was rated at 135hp and another at 145. Not sure how they determined these figures. I don't remember seeing any spec sheet on the cam, it's a regrind with very little time on it. My engine had a couple problems at the time and I swapped it out.
So my dilemma, I had planned on using it, but I'm not too excited about messing with an unknown entity. There is another cam of interest that some fellow club members have installed and are quite happy with.
Short of sending my S2 out to a manufacturer, how can I find out what I have?
So my dilemma, I had planned on using it, but I'm not too excited about messing with an unknown entity. There is another cam of interest that some fellow club members have installed and are quite happy with.
Short of sending my S2 out to a manufacturer, how can I find out what I have?