• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

head studs, Paul

Share this page

tomshobby

tomshobby

Yoda
Offline
The one in back is the original and the closest is the ARP one. The ARP stud is actually longer. Not sure why Shawn had trouble with length.

head_studs_1.jpg
 
Brosky

Brosky

Great Pumpkin
Offline
Well, that's good news. Just to be safe, would you measure each of them, so that when mine come in, I can be sure that they are of the proper length.

Thanks again, Tom!
 
Brosky

Brosky

Great Pumpkin
Offline
Thanks, Tom. That's close enough to determine if these will be too short.
 
swift6

swift6

Yoda
Offline
Maybe yours are now longer because mine were shorter. I didn't experience the too short ARP studs last month or last year. More like seven years ago...
 
DNK

DNK

Great Pumpkin
Country flag
Offline
I guess with that picture the product # from ARP is answered. I went into my storage area and dug up the old box and found the #.
 
Similar threads
Thread starter Title Forum Replies Date
AUSMHLY Reduced-Shank Cylinder Head Studs Austin Healey 0
AUSMHLY Cylinder Head Studs Austin Healey 3
KVH General Tech ARP Head Studs/Liner Protrusion Triumph 10
K TR2/3/3A Oil leaks at two front cylinder head studs? Triumph 3
DrEntropy MGB And now, NO ARP head studs to be found! MG 13
B 1500 head studs Spridgets 3
D BT7 head manifold studs Austin Healey 7
T TR4/4A Are the ARP head studs worth it? [ducks for cover] Triumph 19
gbtr6 TR6 TR 6 Head Studs, replace? Triumph 3
KVH General Tech Removing Stuck Head Studs from Block Triumph 18
alanjohnturner General TR Head-studs, torques and sizes Triumph 2
Boink Hardened/strong head studs on a 1275 - torque? Spridgets 5
T Frozen head studs Austin Healey 11
tinman58 TR2/3/3A Removing head studs TR3 Triumph 15
A Replacing 3.8L cylinder head studs Jaguar 7
R ARP head and connection rod studs? Spridgets 15
Darwin Spitfire Spitfire head studs? Triumph 6
M ARP head studs Triumph 5
Basil Head studs Racing 1
C Wedge TR8 Head Studs Triumph 6
B TR6 TR6 Head Studs Triumph 4
martx-5 ARP Head Studs Triumph 21
Michael Oritt MGA Larger head studs in MGA engine MG 6
Michael Oritt Larger head studs in MG engine Racing 14
healeynut Head Studs Jaguar 9
Morris ARP Head studs torque... Spridgets 2
R TR6 TR6 head studs Triumph 1
jlaird Question-Head studs Spridgets 2
G It was free so who cares...getting head studs out Triumph 10
GB1 Head Studs Spridgets 8
ChrisS ARP Head Studs Racing 2
jcatnite Head Studs Spridgets 15
M Moss Brand Head Studs for 1500 Spridgets 4
V TR6 TR6 Head Studs Triumph 17
K TR2/3/3A Update on the head gasket repair......something is not right/ Triumph 4
K TR2/3/3A New head gasket is installed.....did a compression check motor cold. Triumph 4
J Spitfire Payen Head Gasket -which way up ? Triumph 6
R TR6 Classic british car mechanic on Hilton Head SC Triumph 0
K TR2/3/3A The steel head stud washers? Triumph 7
K TR2/3/3A Applying the Permatex copper gasket spray to the head gasket? Triumph 6
S Spitfire Cyl head coolant hose fitting Triumph 1
B TR6 Milling the head Triumph 5
sim 948 aluminum head gasket Spridgets 2
K TR2/3/3A Retorquing the Cylinder Head after the initial torquing.? Triumph 23
S TR2/3/3A Rebuilding a cylinder head Triumph 10
petnatcar Cylinder Head Nuts - Tightening Sequence Austin Healey 2
tahoe healey "Convertible" vs "Drop Head Coupe" Austin Healey 8
K TR2/3/3A head gasket repair wire Randall Triumph 1
K TR2/3/3A Checking a cylinder head with a straight edge to see if it's warped? Triumph 22
K TR2/3/3A Cylinder Head Bolt question.... Triumph 3

Similar threads

Top