Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
Aloha All,
Let me be the next to endorse Advanced Distributors. The forty-nine year old distributor was badly worn and needed to be repaired or replaced. I discovered this while trying to set the points. I found I could push laterally on the rotor shaft and open and close the points. I followed several discussions on the BCF about replacement options and decided to send Jeff an e-mail to see if he thought he could repair it. I was pleased when he was confident it could be brought back to a better than new condition. So off went my distributor in the mail. In less than two weeks it was back, looking good as new. It had been recurved for a smoother advance and the vacuum advance unit was tested. The first noticeable impression was that the car idled smoothly at about 600 RPM. I had power and good acceleration from low RPMs which I didn't have before. The fuel efficiency has improved by 16%. So, for about half the cost of a new replacement distributor, I have the original (albeit only the housing) in a new and improved condition.
Let me be the next to endorse Advanced Distributors. The forty-nine year old distributor was badly worn and needed to be repaired or replaced. I discovered this while trying to set the points. I found I could push laterally on the rotor shaft and open and close the points. I followed several discussions on the BCF about replacement options and decided to send Jeff an e-mail to see if he thought he could repair it. I was pleased when he was confident it could be brought back to a better than new condition. So off went my distributor in the mail. In less than two weeks it was back, looking good as new. It had been recurved for a smoother advance and the vacuum advance unit was tested. The first noticeable impression was that the car idled smoothly at about 600 RPM. I had power and good acceleration from low RPMs which I didn't have before. The fuel efficiency has improved by 16%. So, for about half the cost of a new replacement distributor, I have the original (albeit only the housing) in a new and improved condition.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.