new to forum,tring to figure out proceedure.need advice on front suspension 74 TR6,seems left side furthur front than right side by 3/4 inch....top wishbone arms ...one side marked R.assume this is for Rear placement on both sides....Lower Arms..which is rear and which is front...are they marked.... and lastly placement of lower arms into frame.. there is four bolt holes on the frame ..each side.. whice one to use does it matter...I assume the Idea is to line the top ball joint up with the lower Trunion in a verticle LIne from top to bottom.. it seems mine is angled forward..apreciate any advice anybody