• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

Bugeye Sprite front frame rail horn replacement

Kurtis

Jedi Warrior
Country flag
Offline
How difficult is it to cut out the old front frame rails and weld in new ones? Mine are in pretty bad shape. The bonnet lock plates were just welded in place at one point and one of them finally fell off while driving the other day.

Kurt
 

Randyz

Member
Country flag
Offline
I'm curious about what others will have to say about this. One of my project cars has a slightly kinked front rail. I was contemplating getting a new one welded on. I'll stay tuned...
 
OP
Kurtis

Kurtis

Jedi Warrior
Country flag
Offline
I'm curious about what others will have to say about this. One of my project cars has a slightly kinked front rail. I was contemplating getting a new one welded on. I'll stay tuned...

I spoke with a local British car shop, and it sounds like it's not a huge deal. I'm planning to just take my car over there in a couple of weeks and let them have a go at it. I'll post a follow up after the work is complete.

Kurt
 

BillyBud

Senior Member
Country flag
Offline
I just did this a few short months ago. My frame rail was hammered in from hitting a curb. I originally expected to have to replace the whole rail piece with one from Moss but ended up making my own and rehabilitating what I had. The trick was to drill out the spot welds on the bottom and peel up that piece which gives you access to the rest. You can cut the welds of the front of the box and remove that too. Like most of the car it's just origami sheet metal, so making replacement pieces from18 gauge is not difficult. Then just get everything aligned between the two rail ends (I had one good side) and with the same upward bend. I MIG'd most of it into place, maybe a little TIG too where there was brazing so I had to use silicon bronze which plays nice with that.. Measure, measure, measure, align, the usual drill. End result is on the last photos.
BTW, the Moss replacement piece doesn't look close to the original, it's pretty cheesy IMO, different fixtures, etc..
P7040028.JPG
P7170063.JPG

P7170071.JPG
P8040050.JPG
P8040049.JPG
P8070002.JPG
 

BillyBud

Senior Member
Country flag
Offline
Here's some close ups of the Moss part. It's probably functionally the same but less so cosmetically which is why I decided to try to resurrect mine. It looked terrible but I figured there wasn't much downside in trying that. and I was happy I did
BTW I have some original frame ends I'd be willing to sell or trade should anyone need that. They've just been hanging around in my dry basement...forever probably!
PA050001.JPG
PA050004.JPG
PA050005.JPG
 
Similar threads
Thread starter Title Forum Replies Date
M Looking for this rare front for a Bugeye Sprite Spridgets 9
T My buddy Rocco in my 64 Sprite [with bugeye front] Spridgets 2
D For Sale 1958 Bugeye Sprite Austin Healey Classifieds 3
CARSINC 1965 Sprite Bugeye Spridgets 5
SNClocks Moss Motors 5-speed install in a Bugeye Sprite Spridgets 2
T Wanted Bugeye Sprite RHD tonneau cover. Austin Healey Classifieds 0
B Bugeye Sprite Wiring Diagram Spridgets 1
C Seat Cover Bugeye Sprite Mark 1 Spridgets 5
T Wanted Smiths fuel gauge for Mk 1 Bugeye Sprite [FG2530/31] Spridgets Classified 1
S For Sale Austin Healey Bugeye Sprite MK 1 Factory Workshop Manual on CD/ROM Austin Healey Classifieds 0
Pythias Bugeye [style] gauges in a Box Sprite? Spridgets 13
I Bugeye Sprite cover recommendatios Spridgets 2
P 5spd Trans for Bugeye Sprite Spridgets Classified 14
R Wanted looking for original seats to fit my 61 bugeye sprite Austin Healey Classifieds 5
P For Sale 1961 Bugeye Sprite Spridgets Classified 0
B For Sale 1959 Austin Healey, Bugeye Sprite with 74k Miles Price Drop- NEED TO SELL Spridgets Classified 0
M Window Seal Bugeye Sprite Removable Hardtop Spridgets 3
T K&N 56-9335 on a bugeye sprite Spridgets 2
T Bugeye Sprite defrost vent installation question Spridgets 18
T Newbie Bugeye Sprite owner engine advise needed Spridgets 5
A Newbie Bugeye Sprite Mk1 owner looking for some advice Spridgets 49
oud272 Bugeye Sprite - Which Windshield Spridgets 7
J WTB: NOS bugeye horn button, and MkII Sprite Hood Emblem Spridgets 1
V Bugeye Sprite TV commercial [Sprite soda] Spridgets 3
V Austin Healey Bugeye Spite TV commercial [Sprite soda] Austin Healey 0
MG Lily Bugeye Sprite Resoration - Where do I start? Spridgets 9
N 1960 Sprite Bugeye Austin Healey 7
D Bugeye Sprite. Spridgets 7
T Oil Pressure-Bugeye Sprite Spridgets 12
RickB I think my Bugeye Sprite has finally found me Spridgets 36
I How do I remove a rear axle in a bugeye sprite? Spridgets 27
J Need Bugeye top frame; Have older Sprite top frame Spridgets 21
B Bugeye Sprite Nut and Bolt Sizes Spridgets 6
H Bugeye Sprite Side Curtains redo Spridgets 8
RickB Bugeye Sprite Bonnet found on Ebay only $2900!!! Spridgets 11
Ohiobugeye Bugeye vs. Sprite Mk2 / Midget Mk1 Starter Cable? Spridgets 20
H Gorgeous '59 Bugeye Sprite Austin Healey 4
W Bugeye and 1966 sprite Parts Spridgets 8
H Installing Headlights on '59 Bugeye Sprite Austin Healey 2
msoylemez Bugeye sprite radiator brackets wanted Spridgets 1
danstr6 Bugeye Sprite for sale on Craigslist-DSM Triumph 0
M Bugeye bonnet mounted on later sprite or midget? Spridgets 21
abarth69 Square body sprite with Bugeye rear bumpers Spridgets 14
Jim_Gruber Bonnet Seal / Bugeye Bonnet on Mark IV Sprite Spridgets 5
John Moore Bugeye v. Sprite MkII/Midget MkI Seats Spridgets 4
jlaird Sprite and Bugeye freaks only Spridgets 13
H WTB - Spare Wheel and Jack for Bugeye Sprite Austin Healey 0
Jayrz Bugeye rear onto square sprite? Spridgets 4
I Best tires for Bugeye Sprite? Spridgets 18
I Best tires for Bugeye Sprite? Austin Healey 5

Similar threads

Top