When I rebuilt my TR3A I decided to go with the micro switch setup for my brake lights as I had read about all the headaches people have with the hydraulic pressure switch.
I bought a switch from one of the local auto stores. That one failed after being a pain to get adjusted. I replaced it with a better micro switch I had from work. It snaps open or closed.
I have noticed that it works some times then other times it does not even though it is Snapping closed as I press the brakes. Possible it is not suitable for DC current.
Any suggestions on a good brake micro switch?
David
I bought a switch from one of the local auto stores. That one failed after being a pain to get adjusted. I replaced it with a better micro switch I had from work. It snaps open or closed.
I have noticed that it works some times then other times it does not even though it is Snapping closed as I press the brakes. Possible it is not suitable for DC current.
Any suggestions on a good brake micro switch?
David