Lukens
Jedi Warrior
Offline
Greetings,
Haven't been posting for some time because I bought a C3 Vette (don't hate me).
My TR3 has been idle for 3-4 months. Had a hard time starting it, but it finally fired with starting fluid. It ran well enough to get it to my garage with partial choke, but it had a definite miss. Today I replaced the plugs, had good spark to all cylinders, but didn't respond to pulling #3 plug boot. Checked compression and measured +/- 150 on all four.
Could it be carburetion? The back carb is opposite #3 and #4 but shares a runner with the front carb so I doubt the manifold is selective. Any ideas as to what's causing #3 to not respond?
Thanks in advance.
Lukens
Haven't been posting for some time because I bought a C3 Vette (don't hate me).
My TR3 has been idle for 3-4 months. Had a hard time starting it, but it finally fired with starting fluid. It ran well enough to get it to my garage with partial choke, but it had a definite miss. Today I replaced the plugs, had good spark to all cylinders, but didn't respond to pulling #3 plug boot. Checked compression and measured +/- 150 on all four.
Could it be carburetion? The back carb is opposite #3 and #4 but shares a runner with the front carb so I doubt the manifold is selective. Any ideas as to what's causing #3 to not respond?
Thanks in advance.
Lukens