When I rebuilt the steering box a few years the bearing was unavailable. The PO had swapped in a more substantial looking bearing of the same size. I see that Moss now carries them. Anyway when I installed the box and set everything up it all works properly but the steering wheel sits about 15 degrees off when I'm driving going by those banjo spokes on the wheel. There was a fair bit of play in the steering wheel so I tightened up the adjuster and that decreased the play but then the steering was too stiff so i backed off the adjustment a bit and now there is a couple of inches of play still there which I can live with. My question is :Can I remove the steering wheel and reposition it so as to get rid of that 15 degree cant of the wheel banjo spokes or would that not solve the issue?
Also in regard to the Revington spring loaded steering box adjuster. Wasn't there a thread on here that indicated it might not really be effective in holding the adjuster pin down for some reason? Anyone here using that Revington steering box top and what do they think of it.
Karl
PS Anyone heard from Randall?
Also in regard to the Revington spring loaded steering box adjuster. Wasn't there a thread on here that indicated it might not really be effective in holding the adjuster pin down for some reason? Anyone here using that Revington steering box top and what do they think of it.
Karl
PS Anyone heard from Randall?