Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have a 1500 mg midget and have the transmission apart and have a question if you could help me with.
There appears to be be a lot of slop in the 3rd 4th synchromesh which exposes the detent ball, see picture in link below.
https://drive.google.com/open?id=1Ab3d5J6wjea--xCyCcdaCCcKaqYtMkKO
I removed the input shaft and measured about 3/16 of spline exposed from the synchromesh, when you rebuilt yours in the video, did you notices that mush exposed spline? See picture of it in the link below.
https://drive.google.com/open?id=1vmRQW1qcUF_GLxQHKxXibWp8Kak6gHZv
There appears to be be a lot of slop in the 3rd 4th synchromesh which exposes the detent ball, see picture in link below.
https://drive.google.com/open?id=1Ab3d5J6wjea--xCyCcdaCCcKaqYtMkKO
I removed the input shaft and measured about 3/16 of spline exposed from the synchromesh, when you rebuilt yours in the video, did you notices that mush exposed spline? See picture of it in the link below.
https://drive.google.com/open?id=1vmRQW1qcUF_GLxQHKxXibWp8Kak6gHZv
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.