Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Jim_Gruber
Yoda
Offline
Anyone got a .pdf Copy of a 210 Shop Manual they can send me a link to? My tranny guy is looking for a couple of specs before he puts it back together.
Got to view my tranny in all of its exploded goodness when I dropped off the driveshaft to check for a leaky rear seal yesterday. Per Glenn, all looked good and clean on the inside other than my laygear between the 4th and 5th gear shafts. This tranny had been apart and rebuilt at some time in the past but I could about a 1/8- 3/16" difference in how the gear fit from one way to another. Could that account for the whine I was hearing when things warmed up, won't know for sure till its back on the road. In the meantime if anyone has a source for the 210 manual...?
Got to view my tranny in all of its exploded goodness when I dropped off the driveshaft to check for a leaky rear seal yesterday. Per Glenn, all looked good and clean on the inside other than my laygear between the 4th and 5th gear shafts. This tranny had been apart and rebuilt at some time in the past but I could about a 1/8- 3/16" difference in how the gear fit from one way to another. Could that account for the whine I was hearing when things warmed up, won't know for sure till its back on the road. In the meantime if anyone has a source for the 210 manual...?
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.