Fuel tank straps

R

RestoreThemAll

Jedi Warrior

Offline

• Jul 17, 2016

• #1

Two questions about the straps for my BJ7.

1) The Moss catalog (21 in pic attached) shows a plate behind the mount that attaches to the boot wall. My mounts are fine but I don't have plates. What is the plate material? Steel? Cork?

2) One of the Ts on the strap is broken off. I was thinking about brazing a bolt on the end of it. Does that sound like a sensible fix?

 

Attachments

• 
  Mounting strap.JPG

  15 KB · Views: 117

steveg

Yoda

Gold

Offline

• Jul 17, 2016

• #2

The plate is steel:

 

OP

R

RestoreThemAll

Jedi Warrior

Offline

• Jul 17, 2016

• #3

I see Steve. It goes to the back side. Makes sense. Is it about 1/8" thick?

 

steveg

Yoda

Gold

Offline

• Jul 17, 2016

• #4

It's 1/16" x 1" x 2-1/2" - just measured it.

 

OP

R

RestoreThemAll

Jedi Warrior

Offline

• Jul 17, 2016

• #5

Perfect! Thank you very much.
Dale

 

R

ripvanwinkel

Freshman Member

Offline

• Jun 22, 2019

• #6

Hi,

There are two pieces of unknown material riveted to each fuel tank strap. Can anyone tell me this material is and are the rivets copper or steel?

 

G

grimes6

Senior Member

Offline

• Jun 22, 2019

• #7

The material riveted to each strap is a thin strip of rubber. I am not quite sure of the rivet type but will check tomorrow and let you know.

 

R

ripvanwinkel

Freshman Member

Offline

• Jun 23, 2019

• #8

Thank you Grimes6. From pictures on the web, this material looks whitish in colour - can you confirm the colour please?

 

Rob Glasgow

Jedi Knight

Offline

• Jun 23, 2019

• #9

IIRC the original packing on the metal straps was more of a tan or brownish paper like material. Like a stiff cardboard. But semi water proof. And yes they were riveted but I don't know if they were copper or steel. At least on a BT7.

 

G

grimes6

Senior Member

Offline

• Jun 23, 2019

• #10

The video may help on u tube [FONT=Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif]https://www.youtube.com/watch?v=_8-leMY8Azo
I noticed in the comments section that one Healey owner had rubber strips under the straps the same as mine. Mine is a BJ7 so maybe they changed the material later. Just on my way to get the straps out of storage.
[/FONT]

 

G

grimes6

Senior Member

Offline

• Jun 23, 2019

• #11

The rivets on my strap are copper bifurcated. I have taken some pics on my phone and will send them to you shortly. I am still not quite sure if the rubber strips are correct as the straps have shorter marks on them where something has been removed . The straps and the rubbers etc. are currently not together.

 

G

grimes6

Senior Member

Offline

• Jun 24, 2019

• #12

Photos as promised. The rubber strips look professionally made but I couldn't be 100% that they are original . If you search for "fuel tank strap" on this forum you will find a previous post which discusses this item. The ruler is metric.

 

Attachments

• 
  rubber_fueltank_straps.jpg

  21.8 KB · Views: 94
• 
  rivets_fueltank_strap2.jpg

  24.2 KB · Views: 88

Healey Nut

Luke Skywalker

Offline

• Jun 24, 2019

• #13

When I did my BJ8s I used a leather belt that I cut then used those brass butterfly paper clip things where you spread the wings out on the back side .
***** NOTE I AM NOT A PURIST ***** so I have no idea and couldnt care less if its not “CORRECT”

 

R

ripvanwinkel

Freshman Member

Offline

• Jun 27, 2019

• #14

Thanks everyone - you've been a great help to me!

 

Patrick67BJ8

Obi Wan

Silver

Offline

• Jun 27, 2019

• #15

I seem to recall that the material was about 1/16” thick and it reminded me of a gasket type of material.

 

Rob Glasgow

Jedi Knight

Offline

• Jun 28, 2019

• #16

Patrick, that's what I remember. The paper was quite stiff but that might of been from age.