-
The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
-
Hey there Guest!
If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.**Upgrade Now**
(PS: Subscribers don't see this UGLY banner)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A Cylinder Heads
- Thread starter karls59tr
- Start date
Share this page
CJD
Yoda
Offline
There are still a bunch around $100 up seems to be the range. Hot tanking will not hurt the guides. As far as costs...a few questions.
Are the valves worn?
Are the guides shot?
Are the seats recessed?
Does it need decking?
Then, if you do need parts...
Stellite valves or straight stainless?
Bronze or iron guides?
If all is good and you just need o touch up the seats, count on about $80. Mine needed everything and ran $400
Are the valves worn?
Are the guides shot?
Are the seats recessed?
Does it need decking?
Then, if you do need parts...
Stellite valves or straight stainless?
Bronze or iron guides?
If all is good and you just need o touch up the seats, count on about $80. Mine needed everything and ran $400
I would get it because I had a difficult time finding one around here. They do make new ones I think for 2K. The problem I ran into was that most the heads where questionable. I bought one that was shaved so bad that it is a racing or very high compression head. There were others I would ask if I could have the head checked for cracks, and that ended the conversation on Craigslist, I do not know for sure why. But again, I would get a spare if I planned to stay in the hobby
Similar threads
Similar threads
-
-
-
-
D
-
-
-
-
-
TR2/3/3A Retorquing the Cylinder Head after the initial torquing.?
- Started by karls59tr
- Replies: 23
-
-
-
-
-
TR2/3/3A Checking a cylinder head with a straight edge to see if it's warped?
- Started by karls59tr
- Replies: 22
-
-
-
-
-
-
-
-
-
-
-
Frame mounted power brake pedal/booster/master cylinder kits for RHD cars?
- Started by Racer-X-
- Replies: 1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MGB Mgb with nissan cylinder head. I am a new member, introduction and help
- Started by Sergio A
- Replies: 1
-
-
-
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.